How to clean the floor tiles

The key to cleaning floor tiles lies in choosing appropriate cleaning tools and methods, mainly including warm water mixed with neutral cleaning agents, baking soda solution, white vinegar solution, specialized tile cleaning agents, regular waxing, etc.

1. Warm water combined with neutral cleaner

Using warm water at around 40 degrees Celsius combined with neutral cleaner is the most basic method for cleaning ceramic tiles. Neutral cleaning agents will not corrode the surface of ceramic tiles and can effectively dissolve common stains. When cleaning, first use a broom or vacuum cleaner to remove surface dust, then use a mop dipped in cleaning solution to wipe, and finally clean with clean water. For oily areas in the kitchen, the concentration of cleaning agents can be appropriately increased.

2. Baking soda solution

Baking soda is a natural stain remover, especially suitable for cleaning tile gaps. Mix baking soda and water in a ratio of 1:2 to form a paste, dip it in an old toothbrush and scrub the gaps. Stubborn stains can be left to stand for 10 minutes before scrubbing. Baking soda's weak alkalinity can not only remove dirt, but also eliminate odors, making it suitable for cleaning bathroom tiles. After use, rinse thoroughly with clean water to avoid residue.

3. White vinegar solution

White vinegar is mixed with water in a ratio of 1:1 and then put into a spray bottle. Spray it on the surface of ceramic tiles and let it stand for 5 minutes, which can effectively dissolve scale and soap scale. The bactericidal effect of acetic acid is particularly suitable for cleaning bathroom tiles. For stubborn water stains, kitchen paper soaked in vinegar solution can be applied to the stain. After cleaning, it is necessary to wipe the ceramic tile glaze with clean water in a timely manner to avoid acetic acid corrosion.

4. Special Ceramic Tile Cleaner

Commercial ceramic tile cleaners are designed for different stains. When purchasing, pay attention to distinguishing between glazed tiles and polished tiles. Before use, test in an inconspicuous location to confirm that there is no corrosion before using on a large scale. After spraying the cleaning agent, use a soft bristled brush or nano sponge to scrub and avoid scratching the surface of the ceramic tiles with hard objects such as steel wire balls. The frequency of using cleaning agents should not be too high, 1-2 times a month is sufficient.

5. Regular waxing

Waxing ceramic tiles can form a protective layer and reduce the penetration of stains. Choose tile specific wax and ensure that the floor is completely dry before construction. Apply wax evenly with a clean cloth, wait for it to dry, and then polish with a soft cloth. It is recommended to wax damp areas such as kitchens and bathrooms every 3 months, and dry areas such as living rooms every six months. Daily cleaning will be easier after waxing. Maintaining tile cleanliness requires establishing daily maintenance habits. Clean the surface dust with an electrostatic mop or vacuum cleaner every day, mop the floor with clean water 1-2 times a week, and promptly deal with stubborn stains. Avoid using strong acid and alkali cleaning agents to prevent damage to the ceramic tile glaze. Pay attention to ventilation during cleaning, especially when using chemical cleaning agents. Regularly inspect the gaps in ceramic tiles and promptly use specialized cleaning agents to treat any blackening or mold. The correct cleaning method can not only keep the tiles shiny as new, but also extend their service life.