How to clean a dirty ceramic basin

Ceramic basins that are dirty can be cleaned with white vinegar, baking soda, toothpaste, lemon juice, or specialized cleaning agents. Stubborn stains can be gently wiped with a soft bristled brush.

1. White Vinegar

The acidic components of white vinegar can dissolve scale and soap deposits on ceramic surfaces. Mix white vinegar and water in a 1:1 ratio, spray on the stain, let it stand for 5 minutes, and then wipe it with a damp cloth. For mold spots at the seams, a cotton swab dipped in white vinegar can be used for local treatment. After cleaning, rinse with clean water to avoid residual acidity.

2. Baking Soda

The micro particles of baking soda have physical friction and are suitable for removing tea or coffee stains on ceramic glaze surfaces. Mix a small amount of baking soda powder with water to make a paste, dip it in a sponge, and clean it by circling. When handling metal parts, avoid the electroplating layer. After cleaning, it is recommended to dry with a dry cloth to prevent water stains from depositing.

III. Toothpaste

White toothpaste containing silica has a polishing effect on ceramic surface scratches. Squeeze soybean sized toothpaste onto a fish scale cloth and repeatedly wipe the yellowed area in the same direction to restore the gloss of the glaze. Be careful to avoid using toothpaste containing particles to prevent scratching the ceramic surface.

4. Lemon Juice

The citric acid in fresh lemon juice can decompose alkaline stains, making it particularly suitable for treating soap residue. Cut the lemon in half and rub it directly against the stained area, or mix it with salt to make a natural cleaning cream. After processing, it is necessary to rinse in a timely manner, as prolonged contact with acidic substances may corrode the sealant.

5. Special cleaning agent

Neutral ceramic cleaning agent can safely remove stubborn oil stains. Choose products that do not contain hydrofluoric acid components. After spraying, wait for the foam to decompose the dirt, and use the nano sponge to absorb the dirt. Heavy stains can be repeated 2-3 times, and ventilation should be maintained after use to avoid chemical residue.

Daily maintenance of ceramic basins should avoid scratching with steel wire balls, and rinsing with warm water every week can prevent dirt accumulation. It is recommended to regularly check the sealing of the drainage outlet after installation to prevent scale from depositing in concealed areas. If cracks or discoloration are found on the glaze surface, it is necessary to contact professional personnel for handling. Self cleaning with strong acid may worsen the damage. When cleaning, be sure to wear rubber gloves to protect your hands. If chemicals come into contact with the skin, rinse immediately with clean water.